Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate or Deactivate the Passenger Airbag on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Airbag

See other generations:
Video tutorial

In this brief video tutorial, see the steps necessary to turn on or off the passenger airbag on a Fiat Tipo. First, switch on the ignition and enter the vehicle settings by pressing the "Ok" button located on the left side of the steering wheel. Now use the arrows on the steering wheel to scroll through the menu options and select "Safety" using the "OK" button.

Here, select "Passenger Airbag" to choose whether to deactivate or activate it, then confirm your selection to complete the task.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to activate/deactivate the start&stop feature of the Fiat Tipo
How to activate/deactivate the start&stop feature of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) This guide shows how to activate or deactivate the start&stop feature of the Fiat Tipo, following the instructions below. First, get into the vehicle…
How to Remove the Airbag on a 2015 Fiat Tipo?
How to Remove the Airbag on a 2015 Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) Caution: It is recommended not to perform this procedure unless you are sure of what you are doing to avoid compromising driver safety. Before starti…
How to Deactivate or Activate the Traction Control on the Fiat Tipo
How to Deactivate or Activate the Traction Control on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) The electronic traction control system integrated into the new Fiat Tipo significantly improves comfort and safety while driving, especially in low g…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos