Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Deactivate or Activate the Traction Control on the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Onboard computer

The electronic traction control system integrated into the new Fiat Tipo significantly improves comfort and safety while driving, especially in low grip conditions on the road. For various reasons, it may be necessary to temporarily deactivate it, and in this guide, you will discover how to do so. All you need to do is: turn on the ignition and locate the button panel to the left of the steering wheel (below the air vent). Press the button dedicated to traction control once to deactivate it (a warning message will appear on the onboard computer). To reactivate it, simply press the same button again.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate/deactivate the start&stop feature of the Fiat Tipo
How to activate/deactivate the start&stop feature of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) This guide shows how to activate or deactivate the start&stop feature of the Fiat Tipo, following the instructions below. First, get into the vehicle…
How to Activate or Deactivate the Passenger Airbag on a Fiat Tipo
How to Activate or Deactivate the Passenger Airbag on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this brief video tutorial, see the steps necessary to turn on or off the passenger airbag on a Fiat Tipo. First, switch on the ignition and enter …
How to deactivate the speed limit audible signal on the Fiat Tipo
How to deactivate the speed limit audible signal on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Today we will explain how to remove the acoustic signal related to the speed limit on a Fiat Tipo model 2 vehicle. To perform this simple operation, …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos