Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Interior dome light bulb

Video tutorial

In this video, learn how to replace the damaged bulb by removing the interior light on a Fiat Stilo. Use a screwdriver to lever between the light and the headlining panel (after removing the screws), pull the light out from the panel, and disconnect the power connector.

Replace the damaged bulb inside with a new one (same size and voltage). Refit the light in its housing (push the transparent plastic with your hands until the clips lock into the side plastic).

Test the correct operation of the bulbs after installation.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulbs on Fiat Stilo
Replacing the Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) How to replace the front headlight bulbs on Fiat Stilo? Start by lifting the front bonnet by pulling the lever located at the bottom right of the das…
How to Change the Front Headlight Bulb on a Fiat Stilo
How to Change the Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the front headlight bulbs on a Fiat Stilo, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it…
How to replace the headlining fabric on a Fiat Stilo?
How to replace the headlining fabric on a Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) To replace the headlining fabric on a Fiat Stilo, you need to remove all the plastic parts that are in the way, such as the handles, sun visors, and …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos