Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Light on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: License plate light

See other generations:
This video is currently unavailable

In this video, let's see how to replace the number plate bulb on a Fiat Grande Punto. Using a screwdriver, remove the number plate light fitting located in the rear bumper of the car (as shown in the video).

Once the light fitting is removed, pull out the bulb holder (using your hands), then disconnect the bulb from it. Install the new LED bulb (same size and voltage), placing it back in the bulb holder, and refit the light fitting into the plastic of the tailgate, pressing until the clips lock.

Finally, test the proper functioning of the bulb installed earlier.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Change the Number Plate Lights on the Fiat Grande Punto
How to Change the Number Plate Lights on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This brief and simple guide shows you how to remove and replace the number plate bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, mov…
How to Replace the Number Plate Light on a Fiat Grande Punto
How to Replace the Number Plate Light on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to replace the damaged bulb located above the number plate on a Fiat Grande Punto? Use a screwdriver or plastic lever to remove the number plate …
Replacing the Number Plate Lights on the Fiat Panda
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you how to remove and replace the number plate lights on the Fiat Punto Evo, as well as the Grande Punto. First, move to the rea…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos