Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Brake pads

Today, in this brief video, you will see how to replace the brake pads on your Fiat Punto. First, lift the car and remove the wheel. To change the pads, you need to remove the brake caliper that is mounted on the discs. Start by unscrewing the bolts that hold the caliper to the discs, then remove the metal clip and extract the pads. To fit the new pads, you must first reset the pistons. Use a flathead screwdriver to assist you. Now, insert the new pads and refit the disc caliper. Repeat the same procedure on the other wheel.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Fiat Punto?
How to Replace the Front Brake Pads on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front brake pads on a Fiat Punto, remove the bolts securing the wheel using a pneumatic gun. Once the wheel is removed, loosen the bol…
How to Replace the Front Brake Pads on a Fiat Grande Punto?
How to Replace the Front Brake Pads on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front brake pads on a Fiat Grande Punto, lift the car with a jack or ramp so that the wheel with the pads to be replaced is off the gr…
Replacing Front Brake Pads on Fiat Punto 199
Replacing Front Brake Pads on Fiat Punto 199
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the front brake pads on a Fiat Grande Punto and Punto Evo 199. First, loosen the whe…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos