Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads and Discs on a Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Brake pads

Let’s see how to replace the brake pads and discs on a Grande Punto. Lift the car on a column lift (jack) to the desired height, then remove the wheel with the respective bolts. Unscrew the locking bolt of the brake caliper and remove it from the wheel hub. Use a screwdriver to detach the pads from the caliper of the wheel hub, remove the brake caliper and then the disc. Fit the new brake disc and new pads. Secure all components with the dedicated bolts and refit the wheel. Test the brake operation.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Brake Replacement for Fiat Grande Punto
Brake Replacement for Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide covers the removal of the front brakes on a Fiat Grande Punto. Remove the wheel to access the brake disc, unscrew the caliper locking bolt…
How to Replace the Front Brake Pads on a Fiat Grande Punto?
How to Replace the Front Brake Pads on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front brake pads on a Fiat Grande Punto, lift the car with a jack or ramp so that the wheel with the pads to be replaced is off the gr…
How to Replace the Rear Brake Discs and Pads of the Fiat Punto Evo
How to Replace the Rear Brake Discs and Pads of the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below are the instructions for removing and replacing the rear brake pads and disc of the Fiat Punto Evo, as well as the Grande Punto. First, lift th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos