Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

Does the cabin air filter need replacing? Here’s how to remove it from a Fiat Scudo. Lift the front bonnet, remove the plastic cover under the front windscreen using a lever, and unscrew the filter cover with a screwdriver (where the air filter is located).

Remove the cap from the filter housing with a screwdriver, then extract the cabin air filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing.

Refit the filter housing cap and tighten the screws. Close the engine bonnet and start the vehicle to check its operation.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…
How to Replace the Diesel Filter on a Fiat Scudo?
How to Replace the Diesel Filter on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) To replace the diesel filter on a Fiat Scudo, open the bonnet to access the components in the engine bay. On the right side, you will find the diesel…
How to Replace the Cabin Filter in a Fiat Scudo 2011
How to Replace the Cabin Filter in a Fiat Scudo 2011
Fiat Scudo (2007-2016 / MK 2) If you do not know how to replace the cabin air filter in your 2011 Fiat Scudo, do not worry because this guide provides all the steps to complete th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos