Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Wing Mirror on Fiat Bravo

Model: Fiat Bravo - Years 1995-2001
Part: Side mirror

Is the wing mirror broken? Here’s how to remove and replace it on a Fiat Bravo. Use a screwdriver to pry between the edge of the mirror frame and the glass. Pry until the glass detaches from the mirror (disconnect the power cable); this is a delicate operation as the plastic of the mirror may break. Fit the new glass, ensuring the plastic clips engage properly in the supports, then refit the plastic base to the car's mirror. Adjust the mirror and check that everything is securely mounted.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Wing Mirror on a Fiat Bravo 2008
Removing the External Wing Mirror on a Fiat Bravo 2008
Fiat Bravo (2007-2014 / Bravo 2) In this video, learn how to remove the external wing mirror on a second-generation Fiat Bravo by following these simple instructions. First, open the…
Replacing the Glass of the External Rear-View Mirror on a Fiat Bravo 2
Replacing the Glass of the External Rear-View Mirror on a Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the glass of the external rear-view mirror on a Fiat Bravo second series, following …
How to Remove the Mirror Cap on Fiat Bravo
How to Remove the Mirror Cap on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To remove the cap, you can either detach the mirror or try to do it while it is still on your car. We will follow the second option. Fold the wing mi…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos