Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glass of the External Rear-View Mirror on a Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the glass of the external rear-view mirror on a Fiat Bravo second series, following these simple steps. First, remove the old glass by gently prising it off the sides using something thin like a plastic lever.

Next, disconnect the small cable to remove it completely; then, fit the new glass by connecting the cable and securing it correctly onto its supports, as shown in the video!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the External Wing Mirror on Fiat Bravo
Removing the External Wing Mirror on Fiat Bravo
Fiat Bravo (1995-2001 / ) Is the wing mirror broken? Here’s how to remove and replace it on a Fiat Bravo. Use a screwdriver to pry between the edge of the mirror frame and the…
How to Replace the Mirror Glass on the Fiat Bravo
How to Replace the Mirror Glass on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) The video shows the exact procedure to dismantle and replace the mirror glass on a Fiat Bravo second model. First, fully extend the mirror outwards a…
Removing the External Wing Mirror on a Fiat Bravo 2008
Removing the External Wing Mirror on a Fiat Bravo 2008
Fiat Bravo (2007-2014 / Bravo 2) In this video, learn how to remove the external wing mirror on a second-generation Fiat Bravo by following these simple instructions. First, open the…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos