Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Removing the door panel on Fiat 500L

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Door panel
Operation: Removing the door panel on Fiat 500L

Disassembly of the door panel of a Fiat 500, let's see the disassembly of the pieces. With a screwdriver we unscrew the screws placed in the space of the handle. We disassemble the plastic covering the opening lever. We unscrew the tightening screws above the panel trim. Unscrew the remaining screws on the door panel and detach the clips for tightening it. We disconnect the power cables and the opening cable. We carry out the desired maintenance inside the door. We mount the new door trim panel, hook the lever cable. We mount the cover of the door opening lever.


Posted on 3 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos