Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Door Speaker of a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Speaker

Before you can start, open the front door of your Fiat 500L. Begin by removing the door panel, taking out the inserts and the window switch, then unscrew the securing screws and unclip the door panel itself. This will reveal the screws that secure the speaker to the door. Proceed to unscrew and remove the securing screws, then extract the speaker from its housing. At this point, disconnect the relevant electrical connector, and the disassembly will be complete. To install the new speaker, simply follow these instructions in reverse, and you will have completed the replacement.

Updated on 14 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble the front door panel of the Fiat 500L
How to disassemble the front door panel of the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today we will discover the process of disassembling and replacing the front door panel of the Fiat 500L. First, we open the front door and start remo…
How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear doors and the boot of your Fiat 500L. Begin by unfastening and removing the upper cover of the boot, disconnecting the…
How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear tailgate of the boot of your Fiat 500L. First, unclip the two cords of the parcel shelf, then dislodge and remove the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos