Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlamp of a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Headlight

In this video, you will see how to remove the front headlamp of the classic Fiat Panda. First, open the bonnet and remove the protective cover of the headlamp bulb. Next, disconnect the three wires that go to the main beam and dipped beam bulbs. Now, remove the three support screws holding the headlamp (8 mm spanner). At this point, simply pull the front headlamp towards you to extract it. Follow the reverse procedure to refit the new headlamp and the new bulbs!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light in a Fiat Panda
How to Replace the Rear Light in a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before you start, open the boot of your Fiat Panda. Begin by unscrewing and removing the screws that secure the rear light to the vehicle. Then, dise…
Replacing the Front Headlight on a Fiat Panda
Replacing the Front Headlight on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Replacing the front headlight on a Fiat Panda? Let's see how to proceed with the disassembly in the video tutorial. Open the bonnet by pulling the bo…
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover how to remove the front headlamp and replace the bulb on the Fiat Panda 169, second series. First, remove the front wheel arch liner by unsc…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos