Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Disassembly of the Fiat Punto Evo trunk opening button

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Push button
Operation: Disassembly of the Fiat Punto Evo trunk opening button

In this video we will see how to remove the trunk opening button of the Fiat Punto Evo. To do this, we will have already had to remove the internal panel of the trunk: afterwards, to work safely, let's disconnect the battery cables. So to disassemble the button we go to unscrew the two 10 mm nuts: we detach the pin as the closure is electric. At this point it will be sufficient to push the whole button outwards to be able to extract it. To reassemble everything, just carry out the reverse procedure. Usually this type of intervention is carried out when there is water infiltration: in this case it is advisable to thicken the whole with gaskets.


Posted on 8 December 2023 by ScegliAuto



How to remove the rear trunk panel in a Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) This short video will show us how to remove the rear trunk trim panel in a Fiat Punto or Fiat Punto Evo. This operation is quite easy and fast and ma
How to open the trunk of the Fiat Punto Evo in an emergency
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see, in this short guide, the steps that will allow us to open the tailgate of the trunk of the Fiat Punto Evo, but also of the Grande
How to open the trunk of the Grande Punto with the emergency opening.
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video, we show you how to open the trunk of the Grande Punto using the emergency opening. Enter the passenger compartment and operate the tru

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos