Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Tyre Pressure Warning Light on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Tire pressure warning light

A very handy feature on this vehicle informs you if one of the tyres has inadequate pressure, which could affect road handling. After restoring the pressure, here’s how to turn off the warning light. On the central panel, there are controls for the onboard computer. Press the Set button, and with the two buttons on either side, navigate through the options until you find the text "Reset Tyres". Select Reset: "Yes" and then Confirm: "Yes"; after that, the light will turn off, provided the pressure has been brought to optimal levels.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2012-2026 / 319, MK 3) This video explains how to reset the tyre pressure warning light on a Fiat Panda. To reset the tyre pressure warning light: turn on the ignition, pre…
Fiat Panda (2012-2026 / 319, MK 3) To reset the tyre pressure warning light on a Fiat Panda, get in the car and turn on the ignition without starting the engine. Use the buttons on the…
Fiat Panda (2012-2026 / 319, MK 3) What to do if a light appears? Let’s see how to reset the tyre pressure light on a Fiat Panda. To reset the tyre pressure light: turn on the ignition…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos