Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Speakers from Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Speaker

See other generations:
Video tutorial

In this video tutorial, you will learn how to change the front speakers of a Fiat Grande Punto. First, open the door and use plastic levers to pry at the sides of the door panel to release it. Then, remove the panel by disconnecting the handle wire and the window electrical connector.

At this point, remove the rivets holding the speaker in place; use a drill for this. Now, pull out the speaker and replace it with a new one if it is too damaged.

Proceed with the reverse procedure for reassembly!


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacing Speakers in a Fiat Grande Punto
Replacing Speakers in a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn the main steps to remove and replace the speakers in a Fiat Grande Punto. First, open the door and remove the …
Replacing the Speakers in the Fiat Grande Punto
Replacing the Speakers in the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, learn how to remove and replace the front speakers of the Fiat Grande Punto, as well as the Punto Evo. First, open th…
Replacing Speakers on the Fiat Grande Punto - Punto Evo
Replacing Speakers on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, follow the instructions on how to remove and replace the front speakers on the Fiat Grande Punto, as well as the Punto Evo. First, open the fr…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos