Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removing the Fiat 500 door panel

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Door panel
Operation: Removing the Fiat 500 door panel

In this video tutorial we will see how to remove the door panel of the Fiat 500. Then open the door on the driver's side and begin to remove all the side clips of the panel: also unscrew the screws with a screwdriver. At this point, with a very thin plastic lever or with a flat screwdriver, we go to remove by levering the frame of the grip handle and unscrew the screws underneath. Then we proceed with detaching the panel by levering it in several points: finally we disconnect the cable of the opening handle by levering with a special tool! Follow the video to the end for reassembly.


Posted on 15 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos