Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Central Locking on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door lock

In this tutorial video, you will see the main steps to fit central locking (with remote opening) on a Fiat Punto. First, obtain a central locking system to install in your car: then see how to fit it. Open the fuse box and remove the indicated connector: at this point, you will work on the wires, modifying and adding them as shown in the video. The process is quite lengthy, but with a bit of patience, you can get everything working without having to cut or solder the electrical wires.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Central Locking on a Fiat Punto
How to Install Central Locking on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today's guide will show you how to install the central locking kit on the Fiat Punto, following the instructions below. First, open the front door of…
Where Are the Fuses on the Fiat Grande Punto?
Where Are the Fuses on the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) All the fuses on the Fiat Grande Punto are divided within the designated fuse boxes present in the vehicle: this model has two fuse boxes. The first …
Guide to Installing Central Locking on the Fiat Grande Punto
Guide to Installing Central Locking on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's guide will show you the main instructions needed to install a new central locking system on the Fiat Grande Punto. First, ensure the kit is c…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos