Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Remove the front bumper of a 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Front bumper
Operation: Remove the front bumper of a 500

Remove the bumper of a 500? We disassemble the bumper of the car if it is damaged. Let's lift the bonnet and put it in safety. We unscrew the locking pins located in the upper part of the bumper. Once you have unscrewed the screws in the upper part, unscrew the pins of the stone guards and finally remove the pins located in the lower part of the bumper. We remove the bumper from the car body by hand. Let's take the new bumper: let's fix it above the front of the 550 until it locks. We tighten all the screws both around the stone guard and around its perimeter. We fasten the covers of the fog lights (if any).


Posted on 21 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos