Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Handbrake on Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Parking brake

In this video tutorial, you will see how to remove the handbrake along with the wiring on a Fiat Punto. Start by removing the wheel, taking out its bolts and lifting the car. Next, remove the brake caliper from the car, and using pliers, remove the rear spring and take the cable out of the brake caliper bracket. Now, go inside and unscrew the central nut of the handbrake with a socket spanner, also removing its wiring. Finally, remove the brake cable from its guide!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To adjust the handbrake on your car, there are usually two bolts located behind it, hidden by a protective plastic cover, which you can use to set th…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to adjust the handbrake on a Fiat Grande Punto by following the instructions below. First, get in the vehi…
Fiat Punto (1999-2011 / MK 2, 188) If the handbrake is too loose or too tight, it may be time to adjust it. The operation is very simple and can be done on your own. First, using a cro…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos