Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Disassembly of the Fiat 500 air vents

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Air Vents
Operation: Disassembly of the Fiat 500 air vents

In today's video tutorial we will see in simple steps how to remove the air vents of a Fiat 500. First we get inside the car and we go to extract the car radio, using the special tools that we will insert into the holes (we must remove the radio buttons): then we pull hard and take out the car radio. At this point we take our air vents and pull them forcefully outwards, without breaking them: now we are going to unhook the upper tabs and extract them. For reassembly it will be enough to apply the same procedure, but in reverse.


Posted on 23 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - How to remove the air vents in the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos