Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat 500 Rear Light Replacement

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Let’s look at removing the rear light on the Fiat 500. Lift the tailgate that closes the boot, locate the securing screws of the light (side of the light). Unscrew the securing screws located at the side of the rear light using a screwdriver.

Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors). Replace the damaged bulbs with new ones (same size and voltage).

Refit the new light with the screws after reconnecting the electrical connectors (modify the connections for the light of the subsequent model). Test the correct operation of the previously fitted bulbs.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Rear Light Bulb in a Fiat 500 L
How to Replace the Rear Light Bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Open the boot of the Fiat 500 L to replace the rear light bulb. Remove the internal side plastic cover of the light to disconnect the connector and u…
How to Replace the Rear Light Bulbs of a Fiat 500
Fiat 500 (2007-2024 / 312) Are the bulbs in the rear light of your Fiat 500 no longer working? Follow this guide to replace the rear light bulbs. Open the boot lid, unscrew the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos