Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Tunnel of a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Center console tunnel

See other generations:
This video is currently unavailable

In this tutorial, you will see how to remove the centre tunnel of a Fiat Grande Punto; this also applies to other models from the manufacturer. First, get inside the car and remove the two plastic covers found at the bottom, at the front: then remove the tunnel which is secured by clips and pull it out applying some force.

At this point, unscrew the three 10 mm nuts to remove the lower part; remove the last part of the centre tunnel, as shown in the video. Next, reassemble everything by applying the reverse procedure!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Removing the Cabin Air Filter on a Fiat Grande Punto
Removing the Cabin Air Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the air filter from a Grande Punto? Let’s see how to disassemble the pollen filter on a Fiat. Remove the cover located at the lower rig…
How to Remove the Centre Console of the Fiat Grande Punto Dashboard
How to Remove the Centre Console of the Fiat Grande Punto Dashboard
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we will see the main steps to remove the centre tunnel of the dashboard of the Fiat Grande Punto, as well as the Punto Evo. First, get…
How to Remove the Centre Console of a Fiat Punto
How to Remove the Centre Console of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you can start, sit in the driver's seat of your Fiat Punto. Begin by removing the gear knob and gaiter. Next, remove the lower side covers to …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos