Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Centre Console of a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Center console tunnel

Before you can start, sit in the driver's seat of your Fiat Punto. Begin by removing the gear knob and gaiter. Next, remove the lower side covers to expose the screws securing the centre console. Proceed to unscrew and remove these screws. Then, detach the rear part of the centre console and remove it. By doing this, you will access the last screws holding the centre console, which also need to be unscrewed. Once you have unscrewed these screws, you can remove the centre console, completing the disassembly.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will see how to remove the centre tunnel of a Fiat Grande Punto; this also applies to other models from the manufacturer. First…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see the main steps to remove the centre tunnel of the dashboard of the Fiat Grande Punto, as well as the Punto Evo. First, get…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos