Do it yourself
Frequently asked questions about cars and motorcycles

Position Bulb Replacement for Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

In this video tutorial, you will find instructions for removing and replacing the position bulb of the front headlamp on a Fiat 500, following these simple steps. First, open and lift the bonnet of your car; then remove the protective cover of the headlamp bulbs and extract the bulb holder along with the position bulb, as shown in the video. At this point, pull out the old bulb and fit the new one; the video demonstrates the installation of a new LED bulb, making the necessary adjustments.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Fiat 500 (2014-2022 / 500 X) In this guide, we will provide instructions for removing and replacing the daytime running or position bulb of the front headlight on a Fiat 500X. To…
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos