Do it yourself
Frequently asked questions about cars and motorcycles

Front Headlamp Bulb Replacement on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

Today, you will learn how to remove and replace the front headlamp bulb on a Fiat 500 TwinAir in simple steps. First, open and lift the bonnet; then remove the plastic protective cap for the bulbs and disconnect the electrical connector of the bulb, allowing the bulb holder to come out with the bulb itself. At this point, remove the old bulb and replace it with the new one of the correct type (in this case, an H4 LED is installed); now reassemble everything by following the reverse procedure of disassembly!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Fiat 500 (2007-2024 / 312) Are the bulbs in the headlamp of your Fiat 500 blown? Here's how to change them. Open the front bonnet by pulling the lever located at the bottom rig…
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos