Do it yourself
Frequently asked questions about cars and motorcycles

Removing Fuses from Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
Video tutorial

How to remove the fuses from the Fiat Grande Punto? The fuses are located in the engine bay or in the car's cabin. Use a plastic lever to remove the cover next to the glove compartment in the dashboard, then use pliers to disconnect the damaged fuses in the compartment.

Once this is done, insert the new fuses into their designated slots. Finally, close the fuse inspection box with the cover, and test the car's functionality by turning on the instrument panel with the appropriate key. Additional fuses can be found in the box located in the engine bay.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If you need to replace a damaged fuse in your Fiat Grande Punto, refer to this video to locate the fuse box and, if necessary, replace them using the…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Fuse replacement on the Fiat Grande Punto? Let's see where they are located. Open the door and enter the cabin, then open the glove compartment in th…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) All the fuses on the Fiat Grande Punto are divided within the designated fuse boxes present in the vehicle: this model has two fuse boxes. The first …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 2005-2018 - Where is the fuel pump relay located in the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the air conditioning fuse on Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos