Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dipped Beam Bulb on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

Manually open the small plastic cover in the wheel arch, on the side of the affected headlight: from here, you can access the various bulbs of the front light. After this, also remove the round rubber cover. Pull the connector of the affected bulb (in this case, the dipped beam) out of the headlight socket. At this point, disconnect the bulb from the connector and insert the new one you have purchased. Refit everything in place, remount the round rubber cover, and finally the plastic of the wheel arch. Start the car and check the correct functioning of the bulb.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Position Bulbs on a Fiat 500
How to Replace the Front Position Bulbs on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's tutorial video, you will learn how to remove and replace the front position bulbs, as well as the dipped beam bulb, on a Fiat 500. To acce…
Replacing the Dipped Beam Bulb (H7) in the Fiat 500
Replacing the Dipped Beam Bulb (H7) in the Fiat 500
Fiat 500 (2007-2021 / 312) To replace the dipped beam bulb in the Fiat 500, first secure the vehicle on a level surface or on a ramp. This step is necessary whenever performing…
Replacing the Front Headlight Bulb on a Fiat 500
Replacing the Front Headlight Bulb on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's video, you will learn how to remove and replace the front headlight bulbs on a Fiat 500 by following these simple steps. First, open and l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos