Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat from the Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Seat

To remove the seats from your Fiat Panda, first position the vehicle on a flat surface or a ramp. This is advisable to ensure the safety of the operator whenever performing maintenance on a car. Start with the front seat. Use the appropriate spanner to undo the four bolts (two at the front and two at the back) that secure it in place. To access the front bolts, slide the seat forward. For the rear bolts, slide the seat backwards instead. At this point, tilt the backrest forward and you can extract the seat from the cabin. Now, proceed to remove the rear seat. For the rear seat, undo the 5 bolts (2 at the front and 3 at the back) and for the backrest, undo the 4 bolts located at the rear. This way, the job is done!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat on a Fiat Panda
How to Remove the Front Seat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the front seat on a Fiat Panda? In this video, you will learn how to proceed. First, move the seat forward (using the electric buttons …
How to Dismantle the Front Seat of a Fiat Panda
How to Dismantle the Front Seat of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to dismantle the front seat of a Fiat Panda after removing it from the cabin. In this video, the procedure is explained: use a screwdriver …
Replacing Seat Covers on a Fiat Panda
Replacing Seat Covers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's see how to replace the seat covers on a Fiat Panda. Enter the cabin of the Panda and start by fitting the lower seat cover. Move the seat forwa…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos