Do it yourself
Frequently asked questions about cars and motorcycles

Removing Door Panel on Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Using a small flat screwdriver, remove the plastic cover from the screw in the door pocket, then unscrew the two 5 mm screws underneath. Similarly, remove the screw covers on the side of the door (accessible only by opening it) and unscrew the now exposed screws.

Again with the flat screwdriver, detach the plastic from the opening handle and find another screw to remove. At this point, use a plastic wedge to pry around the panel, gradually pulling it out from the door, then disconnect the cables and connectors and remove it completely.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Fiat 500 (1957-1975 / Epoca) Removing the door panel of a Fiat 500 (old model). Use a screwdriver to unscrew the securing screws located in the handle, remove the window winder a…
Fiat 500 (2007-2021 / 312) Before you start, open the door of your Fiat 500. Begin by prising off and removing the frame of the internal door handle. Next, remove the inserts f…
Fiat 500 (2007-2024 / 312) How do you remove the door panel on a Fiat 500? Before starting the disassembly work, disconnect the battery terminals located in the engine bay. Usi…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos