Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Light on Fiat Punto Evo 1.2

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Service warning light

Let's see how to reset the service light for routine maintenance of the oil change on a Fiat Punto 1.2 Petrol, using a diagnostic tool. First, get inside the vehicle and turn on the ignition; then connect your OBD unit to the appropriate socket and also connect it to the computer. At this point, select the make and model of the car and perform a diagnosis of the errors present on your vehicle, resetting the routine maintenance light; just follow the video until the end to understand the procedure!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting Engine Warning Light on Fiat Grande Punto - Punto Evo
Resetting Engine Warning Light on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see one way to reset the engine warning light on a Fiat Grande Punto and Punto Evo, following the instructions below. First, e…
How to reset the Service light on a Fiat Punto?
How to reset the Service light on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The operation to reset the Service light on a Fiat Punto cannot be performed using the controls on the dashboard or steering wheel, but you will need…
Resetting the Tyre Pressure Light on Fiat Punto
Resetting the Tyre Pressure Light on Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will see how to reset the tyre pressure light on a Fiat Grande Punto and Punto Evo, in a few simple steps outlined below;…

    Frequently Asked Questions

    • Punto 2005-2018 - How do I reset the expired service warning light on my Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos