Do it yourself
Frequently asked questions about cars and motorcycles

Resetting Engine Warning Light on Fiat Grande Punto - Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Warning light – error code

In this video, we will see one way to reset the engine warning light on a Fiat Grande Punto and Punto Evo, following the instructions below. First, ensure that you have resolved the issue that caused the engine light to come on; then get in the vehicle and connect your diagnostic tool (in this case, Multiecuscan) to the OBD port located under the plastic cover near the steering wheel. At this point, select the make, model, and engine type, and perform the diagnostics; once the error is found, proceed with the reset!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. First, open the boot and unscrew the fixing screws for the.. …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. light on a Fiat Grande Punto, as well as on the Punto Evo. First, get inside the vehicle and connect your OBD scanner to the port located on the side.. …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. 1.3 Multijet, as well as on the Grande Punto and Punto Evo. First, open the bonnet and remove the upper plastic cover; then disconnect the leads or connectors.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the ESP and Hill Holder light on the Grande Punto mean? Read answer
    • Punto 2005-2018 - How to reset the car radio in the Fiat Punto? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos