Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : The engine failure warning light on on Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: -board computer
Operation: The engine failure warning light on on Fiat Grande Punto

In this video tutorial you can see how to reset the engine failure warning light on Fiat Grande Punto. If you have noticed when starting your car that the yellow engine fault lamp has remained on; the causes can be various, it would take a tool for the diagnosis of vehicles to know precisely what could be that is not working correctly, in fact there could be a malfunction in the engine, or in the fuel system or in the control sensors. If you do not have the diagnostic tool, try to clean the throttle body and the injectors thoroughly, remove the filter using a 10mm socket wrench and clean and replace if necessary.


Posted on 23 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why does the Fiat Grande Punto display no longer work? Read Answer
    • Punto 2005-2018 - What does the yellow light on the Fiat Grande Punto indicate? Read Answer
    • Punto 2005-2018 - What does the light on a red steering wheel indicate in a Fiat Punto? Read Answer
    • Punto 2005-2018 - How to reset the Fiat Grande Punto infotainment system? Read Answer
    • Punto 2005-2018 - Why did the yellow triangle light up in the Fiat Punto? Read Answer
    • Punto 2005-2018 - Where is the odometer fuse located on the Fiat Punto Evo? Read Answer
    • Punto 2005-2018 - Where is the Blue & me control unit located on the Fiat Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos