Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Engine Warning Light on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

This guide will show you how to reset the engine fault light on a Fiat Grande Punto, as well as on the Punto Evo. First, get inside the vehicle and connect your OBD scanner to the port located on the side of the dashboard; then turn on the instrument cluster by turning the key to position one, as shown in the video.

At this point, follow the guided procedure on the diagnostic tool to reset the engine control unit, thereby clearing the engine fault light that appears on the instrument cluster!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to reset the engine light on your Fiat Punto but don't know how? Follow these steps to use a mini computer for the reset: open the car's …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we will see one way to reset the engine warning light on a Fiat Grande Punto and Punto Evo, following the instructions below. First, e…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the steering wheel light on the Fiat Punto indicate? Read answer
    • Punto 2005-2018 - What does the ESP and Hill Holder light on the Grande Punto mean? Read answer
    • Punto 2005-2018 - How to reset the car radio in the Fiat Punto? Read answer
    • Punto 2005-2018 - What does the yellow triangle warning light mean in the Fiat Grande Punto? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos