Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Scudo
    4. : Reset service warning light on Fiat Scudo

Fiat Scudo - Video tutorial

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Instrument cluster
Operation: Reset service warning light on Fiat Scudo

Stop the engine and remove the ignition key. Below the instrument panel display you can see two buttons: press and hold the one to your right. Keeping your finger on the button pressed, turn on the instrument panel at this point (not the engine!) And you will notice that a countdown will start on the display: continue to hold down the button under the display until the countdown is over and the service light will be reset. At this point you can start the engine. This procedure is recommended for those who perform the coupons independently.


Posted on 9 January 2024 by ScegliAuto



Fiat Scudo service reset
Fiat Scudo (2007-2016 / MK 2) Do you have a Fiat Scudo and do the service yourself, but you don't know how to reset the service warning light once it is done? Nothing could be sim
How to reset the Fiat Scudo 2008 service light
Fiat Scudo (2007-2016 / MK 2) To manually reset the service warning light that comes on on the dashboard of your Fiat Scudo 2008 it really takes just a few seconds. Let's find out
How to reset the Fiat Scudo oil light
Fiat Scudo (1996-2007 / MK 1) The service light that comes on on the instrument panel of your Fiat Scudo Mk1 is fortunately just a reminder that you need to have your vehicle serv

    Frequently Asked Questions

    • Scudo 2007-2016 - Why does the ESP warning light on the Fiat Scudo 2007 come on? Read Answer
    • Scudo 2007-2016 - What are the warning lights on the dashboard of the Fiat Scudo? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos