Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light

Open the boot and unscrew the two screws that secure the light to the bodywork. Disconnect the connector and remove the light itself. For better access, place the light on a workbench: unscrew the two rear screws that secure the housing where the bulbs are located. At this point, it will be easy to replace the affected bulb, as you just need to unscrew it slightly and pull it out to insert the new one. Once done, reassemble the housing onto the light and reconnect the connector. Fit it back in place and screw it to the bodywork. Good luck!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light from a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Do you want to replace the rear light on a Fiat Punto? Let's see how to proceed with the removal. First, open the boot and remove the inspection cove…
Replacing the Rear Headlight on a Fiat Grande Punto
Replacing the Rear Headlight on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to replace the damaged rear headlight on a Fiat Grande Punto? Let's see how to disassemble the headlight. Lift the rear hatch of the car,…
Removing the Rear Light on a Fiat Punto
Removing the Rear Light on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the rear light on a Fiat Punto? Let's see how to do it. Open the boot lid and remove the fabric cover located at the bottom side. Undo …

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos