Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Fiat Panda 2

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

Today, in this video tutorial, learn how to remove the rear bumper on a second series Fiat Panda by following these simple steps. First, open the boot lid and remove all the Torx screws found on the top of the bumper; next, unscrew the screws located on both sides of the wheel arches, using a Torx screwdriver.

At this point, remove the screws found underneath the bumper, this time using a 8 mm socket wrench, and gently unclip the rear bumper for final removal!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper from a Fiat Panda
How to Remove the Rear Bumper from a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Removing the rear bumper from your Fiat Panda may seem like a complex task, but you can complete it easily by following this procedure. First, park y…
How to Remove the Rear Bumper from a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Before you can start, exit the cabin of your Fiat Panda and head to the rear of the car. Begin by unscrewing and removing the bolts that secure the l…
How to Remove/Reassemble a Bumper on a Fiat Panda
How to Remove/Reassemble a Bumper on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you remove the rear bumper of a Fiat Panda? Let's see how to proceed together; this operation is not too complex. First, take a star screwdriv…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos