Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

Watch this video to learn how to remove and replace the front headlamp bulb on a Fiat 500 in simple and quick steps. First, open the bonnet of your car and remove the plastic protective cover of the bulbs located at the back of the headlamp; then pull out the bulb holder along with the dipped beam bulb, as shown in the video. At this point, extract the old bulb and replace it with the new one of the correct type (in this case, H7); the replacement of all other bulbs is illustrated afterwards!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacing Bulb on Fiat 500
Replacing Bulb on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…
How to Replace the Front Light Bulb on a Fiat 500?
How to Replace the Front Light Bulb on a Fiat 500?
Fiat 500 (2007-2021 / ) To replace the front light bulb on a Fiat 500, access the inner cover of the wheel arch corresponding to the bulb that needs replacing. Here, you wil…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos