Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the rear light on Fiat Ducato 4

Fiat Ducato - Video tutorial

Model: Fiat Ducato X290 - Years 2014-2023
Part: Tail light
Operation: How to remove the rear light on Fiat Ducato 4

In this video tutorial we will see how to remove the rear light on a fourth series Fiat Ducato, following these simple and quick steps. First of all we open the two rear doors and go to unscrew the fixing bolt of the light with a socket wrench, as shown in the video; then we disconnect the electrical connector of the lights to permanently remove the headlight. At this point we can go and replace the internal bulbs; to do this, unscrew the fixing screws of the ceiling light in order to access the lamp holder; for reassembly, just apply the reverse disassembly procedure!


Posted on 12 January 2024 by ScegliAuto



How to remove the rear light of the Fiat Ducato.
Fiat Ducato (2014-2023 / X290) In this guide, we will see the instructions necessary to disassemble and replace the rear light and its bulbs of the Fiat Ducato. First of all, we op
How do you replace the rear camera of the Fiat Ducato?
Fiat Ducato (2014-2023 / X290) In order to replace the rear camera of the Fiat Ducato, you need to loosen the screws that secure the third brake light to its housing: once these sc
How do you replace the rear light bulb on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) In order to replace the bulb in the rear light on the Fiat Ducato, you need to open the tailgate so that you have access to the internal plastic pane

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos