Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wing Mirror on a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Side mirror

In this video, you will learn how to replace the external wing mirror on a Fiat Panda Mk1. The operation is quite simple. Start by opening the door and lowering the window. Remove the 3 screws of the internal trim using a screwdriver or, as shown in the video, a power drill. When you remove the last screw, hold the external mirror to prevent it from falling. Now, you can proceed to fit the new mirror. Insert the adjustment lever of the wing mirror into the hole in the door and place the internal trim triangle with the accordion rubber. Refit the screws, and you're done.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Wing Mirror on a Fiat Panda
How to Remove the External Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Open the front door of your Fiat Panda. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew and remove the nut th…
Guide to Replacing the External Wing Mirror on a Fiat Panda
Guide to Replacing the External Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's steps will show you how to remove and replace the external wing mirror on a Fiat Panda. First, open the front door and begin by removing the …
How to replace the external rear-view mirror on a Fiat Panda
How to replace the external rear-view mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door corresponding to the mirror you need to replace on your Fiat Panda. Begin by unclipping and removing the internal cove…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos