Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Wiper Blade on Fiat 500 Abarth

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

Today, I will show you a simple and really quick maintenance task: replacing the rear wiper blade on a Fiat 500 Abarth. First, you need to remove the cover above the pivot that allows the blade to rotate.

Then, lift the arm and proceed to remove the blade: to do this, you need to use some force and bend the blade almost perpendicular to the arm, as shown in the video. Once done, pull the blade out by moving it slightly.

Similarly, to fit the new blade, slot it in transversely and then straighten it.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Indicator Bulb on a Fiat 500 Abarth
How to Remove the Rear Indicator Bulb on a Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Below are the instructions that will allow you to remove and replace the indicator bulb of the rear light on a Fiat 500 Abarth. First, open the boot …
How to replace the rear shock absorbers on the Fiat 500 Abarth
How to replace the rear shock absorbers on the Fiat 500 Abarth
Fiat 500 (2007-2021 / ) In this video, you will see how to remove and replace the rear shock absorbers on the Fiat 500, in Abarth version; these components should be replace…
Replacing Front Shock Absorbers on a Fiat 500 Abarth
Replacing Front Shock Absorbers on a Fiat 500 Abarth
Fiat 500 (2012-2023 / 500 L) In this video, you will see how to replace the front shock absorbers on the small Italian sports car, the Fiat 500 Abarth. First, lift the bonnet of …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos