Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Shock Absorbers on a Fiat 500 Abarth

Model: Fiat 500 500 L - Years 2012-2023
Part: Shocks

In this video, you will see how to replace the front shock absorbers on the small Italian sports car, the Fiat 500 Abarth. First, lift the bonnet of your car and remove the clips from the plastic grille located under the wipers: this will expose the top of the shock absorber where you will apply some penetrating oil. Unscrew the top bolt with a ratchet while holding the nut underneath with a 10mm spanner. Now lift the car and remove the wheel: remove the brake pipe clip and unscrew the suspension nut, detaching it from the brake caliper as well.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing al…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Removing Rear Light on a Fiat 500 Abarth
Removing Rear Light on a Fiat 500 Abarth
Fiat 500 (2012-2023 / 500 L) How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2012-2023 - How much does it cost to change the Fiat 500 shock absorbers? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos