Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb in a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Headlight bulb

Before starting, open the bonnet of your Fiat Punto. Begin by unhooking and removing the rear cover of the blown bulb in the front headlamp. Next, unclip the bulb from its housing and pull it out. At this point, disconnect the corresponding electrical connector. Once you have completed this step, you can finally remove the blown bulb, successfully finishing the disassembly. To install the new bulb, simply follow these instructions in reverse, and the replacement will be complete.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
How to Replace the Front Headlamp Bulb on a Fiat Punto
How to Replace the Front Headlamp Bulb on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
How to Replace the Headlight Bulb of a Fiat Punto?
How to Replace the Headlight Bulb of a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, open the front bonnet of your Fiat Punto. Begin by unclipping and removing the internal cover of the blown bulb. Next, unclip the bu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos