Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace LPG Injectors on Fiat Idea

Model: Fiat Idea MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuel injectors

Video tutorial

In this video, we will see the instructions on how to disassemble and replace the LPG injectors on a Fiat Idea. First, open the bonnet of your car and start by disconnecting the battery, removing only the negative terminal; then disconnect the pressure sensor connector by releasing the tab, and disconnect the electrical connectors of the injectors.

At this point, unscrew the fastening screws using a 10 mm spanner, and disconnect the four gas pipes by loosening the metal clips; all that remains is to remove them for cleaning or replacement!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Change the Time on a Fiat Idea
Fiat Idea (2003-2016 / MK 1) Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …
Where to Find the Fuse Box in the Fiat Idea
Where to Find the Fuse Box in the Fiat Idea
Fiat Idea (2003-2016 / MK 1) In this mini guide dedicated to your Fiat Idea Mk2, we will discover where the fuse box is located. Before starting, remember that any replacement or…
Guide to Replacing the Timing Belt on a Fiat Idea 1.4 8V
Guide to Replacing the Timing Belt on a Fiat Idea 1.4 8V
Fiat Idea (2003-2016 / MK 1) Today, we will discover the steps to remove and replace the timing belt on a Fiat Idea 1.4 8V. First, lift the vehicle and start by removing the fron…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos