Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Steering Wheel and Dashboard on Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Dashboard

To remove the airbag from the steering wheel, you need to unscrew the three 5 mm screws from the back using an Allen key. Once the airbag is extracted, disconnect its connector and remove it completely. To also remove the steering column, you will need to unscrew the central bolt with a 19 mm socket and pull it out from the rear mount. Unscrew the two 5 mm screws to remove the upper cover of the steering wheel. Now move the cover under the dashboard just enough to unscrew the last two screws. Finally, you can extract the dashboard and disconnect its connectors. Proceed in reverse for reassembly.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Steering Wheel on Fiat Stilo
Removing Steering Wheel on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this tutorial, learn how to remove the steering wheel, along with the airbag, on a Fiat Stilo in simple steps. First, get inside the vehicle and r…
Removing the Steering Wheel Airbag on Fiat Stilo
Removing the Steering Wheel Airbag on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial video, you will see how to remove the steering wheel airbag on a Fiat Stilo, following the instructions below. First, get inside …
Where is the OBD port of the Fiat Stilo located?
Where is the OBD port of the Fiat Stilo located?
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos