Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Instrument Cluster Lights on Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Instrument panel light

In today's tutorial video, you will learn how to dismantle and replace the bulbs in the instrument cluster of a Fiat Punto third series. First, get inside the vehicle and remove the upper part of the cluster to access the screws underneath. Next, unscrew the additional screws located beneath the cluster and remove it by disconnecting the electrical connector. Remove the screws from the plastic cover and release it by pressing the tabs: you will access the electronic board and the bulbs to be replaced (in this case, they are LED).

Updated on 13 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to Replacing the Number Plate Lights
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The video shows how to carry out this simple maintenance operation to replace the lights that illuminate the rear number plate or simply replace them…
How to reset the "Service" light on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To reset the "Service" light on a Fiat Punto, you need to use an appropriate diagnostic tool. Start by connecting the tool to the OBD port of the car…
Guide to Replacing the Injectors on the Fiat Punto 1.3 MultiJet
Guide to Replacing the Injectors on the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, you will find instructions to remove and replace the injectors on the Fiat Punto 1.3 MultiJet. First, open the engine cover of the veh…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos