Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Climate Control Controls on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: A/C controls

See other generations:
Video tutorial

Insert the appropriate double-needle keys fully into the corner holes of the radio, then extract it and disconnect the cables. Unscrew the two screws that are now accessible and secure the radio support, removing it, then unscrew the other two side screws as shown in the video.

Now unscrew the two screws beneath the climate control controls. Finally, you can extract this compartment and disconnect its connectors.

This process is useful for either replacing the entire area or for replacing the bulbs of the controls, accessing from the rear. Proceed in reverse for reassembly.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Climate Control Bulbs on a Fiat Punto
How to Replace the Climate Control Bulbs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Here are the instructions to remove and replace the climate control bulbs on a Fiat Punto. First, get into the vehicle and start by removing the plas…
How to Remove the Climate Control Controls on the Fiat Grande Punto
How to Remove the Climate Control Controls on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The instructions in this guide will show you the procedure for removing and replacing the climate control controls on the Fiat Grande Punto, as well …
How to Remove the Climate Control Controls on a Fiat Punto
How to Remove the Climate Control Controls on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will provide instructions for removing and replacing the climate control controls on a Fiat Punto Evo. First, get into the cabin and start…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos