Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Horn Trumpets on Fiat Freemont and Dodge Journey

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016

Video tutorial

Lift the bonnet and remove the round clips above the front bumper grille using a plastic wedge or flat screwdriver. Now, working slowly as shown in the video, detach the bumper grille bit by bit without breaking the clips.

Done! Once the grille is removed, you will see the horn trumpets clearly: they are located just above the radiator, and the replacement is really straightforward. Simply disconnect the connector and unscrew the bolt that secures them to the bracket to remove and fit the new ones.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switch Panel on a Fiat Freemont - Dodge Journey
How to Remove the Window Switch Panel on a Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) In this tutorial, you will learn how to remove and replace the window switch panel and the wing mirror adjustment switch on the Fiat Freemont and Dod…
Removing the Intake Manifold of the Fiat Freemont - Dodge Journey
Removing the Intake Manifold of the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) In today's tutorial video, we will see the main instructions for removing and replacing the intake manifold of the Fiat Freemont and Dodge Journey. F…
Replacing the Cabin Fan Resistor on the Dodge Journey - Fiat Freemont
Replacing the Cabin Fan Resistor on the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) In this video, you will see the steps to remove and replace the cabin fan resistor on the Dodge Journey, as well as on the Fiat Freemont. First, get …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos