Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Door trim panel

Before starting, open the door of your Fiat Panda. Begin by detaching and removing the clip that secures the window winder, then remove the winder itself. Next, using a thin but sturdy tool, pry to release the internal clips that secure the panel to the door. This will free the door panel. Proceed to remove it from its position on the door. Once you complete this step, the removal will be successfully finished.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door of your Fiat Panda. Begin by unfastening and removing the covers near the internal door handle. Next, unscrew and remo…
How to Remove the Door Panel on a Fiat Panda
How to Remove the Door Panel on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the door panel (driver side) on a Fiat Panda? Let’s see how to proceed in this video. Use a lever to remove the small cover (located ne…
How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the door of your Fiat Panda. Begin by unclipping and removing the covers positioned near the internal handle. Next, unscre…

    Frequently Asked Questions

    • Panda 1980-2003 - How do you remove the internal door panel on the FIAT Panda 141? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos