Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wheel Disc on a Fiat Doblo

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake rotors

See other generations:
Video tutorial

Let's look at replacing the brake disc on a Fiat Doblo. Lift the car to a comfortable working height, unscrew the bolts with a socket wrench or air drill, and remove the wheel.

Next, start unscrewing the bolts of the brake caliper to detach it from the bracket (use a screwdriver to detach the brake pads). Now remove the caliper bracket and unscrew the bolts on the brake disc (using a Torx screwdriver), then pull the disc towards you to remove it from the wheel hub. Fit the new brake disc with all the associated bolts.

Lower the car to the ground after replacing the parts.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel Bearing on a Fiat Doblo
How to Remove the Rear Wheel Bearing on a Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this video, see how to remove the rear wheel bearing on a Fiat Doblo. Position the car on a column lift, loosen the bolts with a telescopic spanne…
Replacing Brake Discs and Pads on Fiat Doblo
Replacing Brake Discs and Pads on Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) To replace the front brake discs and pads on this car model, start by lifting the vehicle and removing the front wheel; then remove the protective ca…
Replacing the Starter Motor on a Fiat Doblo
Replacing the Starter Motor on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Need to replace the broken starter motor on your Fiat Doblo? Here’s how to remove it. Open the front bonnet, remove the battery (use a socket wrench …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos