Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of a Fiat Doblo

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Key

Start by pressing the button located on the top side of the electronic key of your Fiat Doblo, which will open the physical key. Next, using a flathead screwdriver, unlock the battery housing by turning the side screw to the "UN-LOCK" position. This will free the battery housing. Proceed by extracting the housing from the key. At this point, remove the battery itself, and you will have completed the disassembly. To fit the new battery and close the key, repeat this procedure in reverse, and the replacement will be finished.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Replacing the battery of the Fiat Doblo key is a very simple and quick operation, to be carried out independently. For the replacement, we will need …
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The video attached to this article shows the fuse diagram for our Fiat Doblo. Fuses are electronic devices that protect the car's electrical componen…
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) The radio fuse for your Fiat Doblo is located inside the fuse box. The fuse box is situated on the lower left side of the steering column. To access …

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - How to solve the problem of central locking in the Fiat Doblò? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos